Sunday, 25 February 2018

Ultrasonic Range Detector Using Arduino and the SR04 Ultrasonic Sensor

 

 

Step 1: Connecting the SR04 Ultrasonic Sensor to the Arduino

Picture of Connecting the SR04  Ultrasonic Sensor to the Arduino
Picture of Connecting the SR04  Ultrasonic Sensor to the Arduino

 

 

 

 

 

 

 

 

 

 

 

Step 2: Parts List

1               Arduino uno R3, or any Arduino for that matter
1               SR04 Ultrasonic Sensor
1               breadboard
4               Jumper Wires

 

 

 

Step 3: Connect Ultrasonic Sensor to Arduino

You Need 4 Jumper wires to conect the SR04 Ultrasonic Sensor to the Arduino:

1  From the SR04  VCC pin to the Arduino 5v
1 From the SR04  GND pin to the Arduino GND
1 From the SR04  TRG pin to the Arduino Digital pin 12
1 From the SR04  ECHO pin to the Arduino Digital pin 11


That's All The wiring you need... Easy,  no?

Next Step, load the Software library and sketches.

 

 

Step 4: Step 4 Download SR04 Library and Install to Arduino IDE



You need to download another Library  to get the Arduino to talk with the SR04 sensor. The sensor I got didn't come with any documentation, so I Googled around until I found a library that works.
I found an optimized library here
Download the library unzip it,  and install it in the Arduino IDE. Place it inside your Arduino libraries folder , and restart the Arduino IDE. For convenience, I included the file  in  the files section below.



You should now be able to see the  library and examples in  select File > Examples > NewPing > NewPingexample sketch.
load the sketch to your Arduino.


If you were successful at installing the libraries, and loading the NewPingexample sketch,  Compile the sketch  by clicking on the verify button and make sure there are no errors.


It's time to connect your Arduino to your PC using the USB cable.  Click on the upload button  to upload the sketch to the Arduino.


Once uploaded to the Arduino, open the serial monitor, and you should see the distance  data stream   coming from the sensor.

No comments:

Post a Comment